Required Ports
The following table lists the ports used by sensors, the Ethernet-based protocols, the SDK, and the PC-based accelerator. Use this information to determine whether you need to open ports on your network and to understand the traffic that a sensor system will produce over a network.
Port | Data Packet Protocol | Description |
---|---|---|
80 | TCP | Server for sensor web interface |
502 | TCP | Modbus protocol communication |
2016 | UDP | Internal (protocol-independent) |
2017 | TCP | Internal (protocol-independent) |
2018 | TCP | Internal (protocol-independent) |
2019 | TCP | Internal (protocol-independent) |
2020 | UDP |
|
3189 |
TCP |
Flash security policy server (only in Gocator 4.7 and earlier releases) |
3190 |
TCP |
|
3191 |
TCP |
Emulator web port |
3192 |
TCP |
|
3194 |
TCP |
|
3195 |
TCP |
|
3196 |
TCP |
|
3197 | UDP | Emulator scenario management (RPC) |
3220 |
UDP |
|
8190 | TCP | ASCII protocol |
44818 |
TCP |
EtherNet/IP protocol (standard port) |
44818 |
UDP |
EtherNet/IP protocol (standard port) |
For more information on how the different protocols use these ports, see the appropriate section in Protocols.