Set Alignment Reference
The Set Alignment Reference command is used to set the sensor's alignment reference.
Field |
Type |
Offset |
Description |
---|---|---|---|
length |
32u |
0 |
Command size including this field, in bytes. |
id |
16u |
4 |
Command identifier (0x4103). |
reference |
32s |
6 |
Alignment reference 0 – Fixed 1 – Dynamic |
Field |
Type |
Offset |
Description |
---|---|---|---|
length |
32u |
0 |
Reply size including this field, in bytes. |
id |
16u |
4 |
Reply identifier (0x4103). |
status |
32s |
6 |
Reply status. For a list of status codes, see Status Codes. |