Set Buddy
The Set Buddy command is used to assign or unassign a Buddy sensor.
Field |
Type |
Offset |
Description |
---|---|---|---|
length |
32u |
0 |
Command size including this field, in bytes. |
id |
16u |
4 |
Command identifier (0x4005). |
buddyId |
32u |
6 |
Id of the sensor to acquire as buddy. Set to 0 to remove buddy. |
Field |
Type |
Offset |
Description |
---|---|---|---|
length |
32u |
0 |
Reply size including this field, in bytes. |
id |
16u |
4 |
Reply identifier (0x4005). |
status |
32s |
6 |
Reply status. For a list of status codes, see Status Codes. |