State and Health Information
In the Tool Stats pane, you can examine state and health information.
The following information is available in the System tab on the Dashboard page:
Name | Description |
---|---|
Sensor State |
Current sensor state (Conflict, Ready, or Running). |
Application Version |
Sensor firmware version. |
Laser Safety |
Whether |
Uptime |
Length of time since the sensor was power-cycled or reset. |
CPU Usage |
Sensor CPU utilization. |
Current Speed |
Current speed of the sensor. |
Encoder Value |
Current encoder value (ticks). |
Encoder Frequency |
Current encoder frequency (Hz). |
Memory Usage |
Sensor memory utilization (MB used / MB total available). |
Storage Usage |
Sensor flash storage utilization (MB used / MB total available). |
Ethernet Link Speed | Speed of the Ethernet link (Mbps). |
Ethernet Traffic |
Network output utilization (MB/sec). |
Internal Temperature | Internal sensor temperature. |
Processing Latency |
Last delay from camera exposure start to when the results are ready for output. |
Processing Latency Peak |
Peak delay from camera exposure start to when the results are ready for output. |
Alignment State |
Whether the sensor or sensor system has been aligned. |
Over Temperature State |
Whether the internal temperature of the sensor is over a predetermined level. |
Over Temperature Duration |
The amount of time that the internal temperature of the sensor has been over a predetermined level. |
Name | Description |
---|---|
Scan Count |
Number of scans performed since sensor state last changed to Running. |
Trigger Drop |
Count of camera frames dropped due to excessive trigger speed. |
Processing Drop |
The sum of various indicators related to processing drop including drops due to insufficient CPU and buffer overflows. |
Ethernet Output Drop |
Count of frame drops due to slow Ethernet link. |
Analog Output Drop |
Count of analog output drops because last output has not been completed. |
Serial Output Drop |
Count of serial output drops because last output has not been completed. |
Digital Output 1 Drop |
Count of digital output drops because last output has not been completed. |
Digital Output 2 Drop |
Count of digital output drops because last output has not been completed. |
Digital Output 1 High Count |
Count of high states on digital output. |
Digital Output 2 High Count |
Count of high states on digital output. |
Digital Output 1 Low Count |
Count of low states on digital output. |
Digital Output 2 Low Count |
Count of low states on digital output. |
Anchor Invalid Count |
Count of invalid anchors. |
Valid Spot Count |
Count of valid spots detected in the last frame. |
Max Spot Count |
Maximum number of spots detected since sensor was started. |
Camera Search Count |
Count of camera frames where laser tracking is lost. Only applicable when tracking window is enabled. |
* When the sensor is accelerated, the indicator's value is reported from the accelerating PC.
** When the sensor is accelerated, the indicator's value is the sum of the values reported from the sensor and the accelerating PC.