Alignment Reference
The Alignment Reference setting can have one of two values: Fixed or Dynamic.
|
Setting |
Description |
|---|---|
|
Fixed |
A single, global alignment is used for all jobs. This is typically used when the sensor mounting is constant over time and between scans, for example, when the sensor is mounted in a permanent position over a conveyor belt. |
|
Dynamic |
A separate alignment is used for each job. This is typically used when the sensor’s position relative to the object scanned is always changing, for example, when the sensor is mounted on a robot arm moving to different scanning locations. |
To configure alignment reference:
|
|||
|